Wireless access points
EDIMAX IAP1200
2 x 2 AC1200 Dual-Band In-Wall PoE Access Point
HARDWARE
Specifications as published by the manufacturer.
- LAN Interface
- Giga x 2, RJ11 x 2
- PoE
- 802.3af (Supports 802.3at)
- Antenna
- Type: 2 x Built-In PIFA Gain: 2.14dBi (2.4GHz), 3.8dBi (5GHz) Max.
- Power
- 802.3af (Support 802.3at)
- Dimensions
- Faceplate Set: 70 x 115 x 17.9 mm (US-Type ) Faceplate Set: 86 x 86 x 17 mm (EU-Type ) Stand with Mounting Bracket: 48.8 x 74 x 38.4 mm
- Weight
- 125g
- Power Consumption (Full Loading)
- 8W
- Mounting
- In-wall
- WPS/Reset
- Y
- LED Indicator
- 1. Power LED 2. Diag LED
- Environmental Conditions
- Operating Temperature: 0°C (32°F) to 40°C (104°F) Storage Temperature: -20°C (-4°F) to 60°C (140°F) Operating Humidity: 90% or Less Storage Humidity: 90% or Less
- Power Saving
- 802.3az
- Internal Buzzer
- Y
- Housing
- Flammability Rating Plastic
WIRELESS
- Standard
- 802.11 a/ b/ g/ n/ ac Concurrent Dual-Band
- No. of Radios
- 2
- Receiver Sensitivity
- ≤ -91dBm
- Certification
- CE, FCC, NCC, BSMI, IMDA
- Fast Roaming
- Y
- Number of SSIDs
- 16 (2.4GHz) + 16 (5GHz)
PERFORMANCE
- Maximum Data Speed
- 300 + 867Mbps
- Concurrent Clients
- Up to 50 Per Radio
RF SPECIFICATIONS
- Frequency Band
- •Radio Ⅰ: 802.11b/ g/ n 2.412 ~ 2.484 (GHz) •Radio Ⅱ: 802.11a/ n/ ac 5.18 ~ 5.24 (GHz), 5.745 ~ 5.825 (GHz) (The supported frequency band is restricted by local regulations.)
SECURITY
- Encryption
- WEP / WPA / WPA2
- Wireless L2 Isolation
- Y
- Station Isolation
- Y
- IEEE 802.1x Authenticator
- Y
- EAP Authentication
- PEAP
- Hidden SSID
- Y
- MAC Address Filter
- Y
- Wireless STA
- Y
SOFTWARE
- Wireless Mode
- AP / WDS AP / WDS Bridge
- 802.1q VLAN
- Y (VID = 1-4095)
- Spanning Tree
- RSTP
- QoS
- WMM (802.11e) Max Associated Station No.
- Pass-Through
- IPv6 and VPN (PPTP, L2TP/ IPsec)
- DSCP (802.1p)
- Y
- Multicast Rate up to 54Mbps
- Y
MANAGEMENT
- Deployment
- Standalone: AP mode Managed AP mode: Be managed by Edimax Pro AP Controller (APC500), Edimax Pro Master AP with NMS Software
- Configuration
- HTTP / HTTPS SNMP v1, v2c, v3 CLI (Telnet, SSH)
- RADIUS Server
- Built-In
- Auto-Channel
- Y
- Private MIB
- Y
Package Contents
- Access Point
- AC1200 In-Wall PoE Access Point
- Mounting Bracket
- In-Wall-Mount Bracket Kit
- Quick Installation Guide
- Printed English Quick Installation Guide
Same category
- DrayTekDrayTek VigorAP 90511ax 雙頻無線網路、最大無線網路速率: 3 Gbps、壁掛式設計、2.5GbE LAN埠
- DrayTekDrayTek VigorAP 912C11ac Wave 2 雙頻無線網路、最大無線網路速率: 1.2 Gbps、吸頂式設計
- DrayTekDrayTek VigorAP 918R 系列11ac Wave 2 雙頻無線網路、最大無線網路速率: 1.3 Gbps、壁掛/柱掛式設計、IP67 防水防塵
- DrayTekDrayTek VigorAP 962C11ax 雙頻無線網路、最大無線網路速率: 3 Gbps、吸頂式設計、2.5GbE LAN埠
- DrayTekDrayTek VigorAP 1062C11ax 雙頻無線網路、最大無線網路速率: 6 Gbps、吸頂式設計
- NusoftNusoft NAP enterprise wireless access point802.11ax, 2.4/5 GHz dual band, MU-MIMO, up to 1800Mbps, ceiling mount, PoE (802.3af) or adapter, 16 SSIDs, fat and thin AP modes
- EDIMAXEDIMAX APC500Wireless AP Controller
- EDIMAXEDIMAX CAP12002 x 2 AC Dual-Band Ceiling-Mount PoE Access Point