陞釔有限公司
Storage and NAS

QNAP TS-262A

Tower, 2-bay, Intel Celeron N5095 4-core/4-thread processor, 4 GB SODIMM DDR4

QNAP TS-262A
Hardware specifications

Specifications as published by the manufacturer.

CPU
Intel® Celeron® N5095 4-core/4-thread processor, burst up to 2.9 GHz
CPU Architecture
64-bit x86
Graphic Processors
Intel® UHD Graphics
Encryption Engine
(AES-NI)
System Memory
4 GB SODIMM DDR4
Maximum Memory
16 GB (2 x 8GB)
Memory Slot
2 x SODIMM DDR4
Flash Memory
4GB (Dual boot OS protection)
Drive Bay
2 x 3.5-inch SATA 6Gb/s The system is shipped without HDD.
Drive Compatibility
3.5-inch SATA hard disk drives 2.5-inch SATA solid state drives
Hot-swappable
(Not supported M.2 SSD)
M.2 Slot
2 x M.2 2280 PCIe Gen 3 x1 If a heatsink is to be installed, it is recommended that the top heatsink dimensions be less than 68 x 20 x 10 mm (L x W x H)
2.5 Gigabit Ethernet Port (2.5G/1G/100M)
1 (2.5G/1G/100M/10M)
USB 2.0 port
2
USB 3.2 Gen 2 (10Gbps) Port
2 x Type-A
Form Factor
Tower
LED Indicators
Power/Status, LAN, USB, HDD1-2
Buttons
Power, USB copy, Reset
Operating Temperature
0 - 40 °C (32°F - 104°F)
Storage Temperature
-20 - 70°C (-4°F - 158°F)
Relative Humidity
5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit
48W adapter, 100-240V
Power Consumption: Disk Standby Mode
14.75 W
耗電量:運作模式,一般
20.77 W Tested with drives fully populated.
System Warning
Buzzer
Standard Warranty
3 years
同時連線 (CIFS) 數目上限 - 最大記憶體
1500